1 Editing Pictures

If you want to create a picture made out of text characters (for example, a picture of the division of a register into fields, as a comment in a program), use the command M-x edit-picture to enter Picture mode.

In Picture mode, editing is based on the quarter-plane model of text, according to which the text characters lie studded on an area that stretches infinitely far to the right and downward. The concept of the end of a line does not exist in this model; the most you can say is where the last nonblank character on the line is found.

Of course, Emacs really always considers text as a sequence of characters, and lines really do have ends. But in Picture mode most frequently-used keys are rebound to commands that simulate the quarter-plane model of text. They do this by inserting spaces or by converting tabs to spaces.

Most of the basic editing commands of Emacs are redefined by Picture mode to do essentially the same thing but in a quarter-plane way. In addition, Picture mode defines various keys starting with the C-c prefix to run special picture editing commands.

One of these keys, C-c C-c, is pretty important. Often a picture is part of a larger file that is usually edited in some other major mode. M-x edit-picture records the name of the previous major mode so you can use the C-c C-c command (picture-mode-exit) later to go back to that mode. C-c C-c also deletes spaces from the ends of lines, unless given a numeric argument.

The commands used in Picture mode all work in other modes (provided the ‘picture’ library is loaded), but are not bound to keys except in Picture mode. Note that the descriptions below talk of moving “one column” and so on, but all the picture mode commands handle numeric arguments as their normal equivalents do.

Turning on Picture mode runs the hook picture-mode-hook (@pxref{Hooks}).

1.1 Basic Editing in Picture Mode

Most keys do the same thing in Picture mode that they usually do, but do it in a quarter-plane style. For example, C-f is rebound to run picture-forward-column, a command which moves point one column to the right, inserting a space if necessary so that the actual end of the line makes no difference. C-b is rebound to run picture-backward-column, which always moves point left one column, converting a tab to multiple spaces if necessary. C-n and C-p are rebound to run picture-move-down and picture-move-up, which can either insert spaces or convert tabs as necessary to make sure that point stays in exactly the same column. C-e runs picture-end-of-line, which moves to after the last nonblank character on the line. There is no need to change C-a, as the choice of screen model does not affect beginnings of lines.

Insertion of text is adapted to the quarter-plane screen model through the use of Overwrite mode (@pxref{Minor Modes}). Self-inserting characters replace existing text, column by column, rather than pushing existing text to the right. <RET> runs picture-newline, which just moves to the beginning of the following line so that new text will replace that line.

Picture mode provides erasure instead of deletion and killing of text. <DEL> (picture-backward-clear-column) replaces the preceding character with a space rather than removing it; this moves point backwards. C-d (picture-clear-column) replaces the next character or characters with spaces, but does not move point. (If you want to clear characters to spaces and move forward over them, use <SPC>.) C-k (picture-clear-line) really kills the contents of lines, but does not delete the newlines from the buffer.

To do actual insertion, you must use special commands. C-o (picture-open-line) still creates a blank line, but does so after the current line; it never splits a line. C-M-o, split-line, makes sense in Picture mode, so it is not changed. <LFD> (picture-duplicate-line) inserts below the current line another line with the same contents.

If you want to do real deletion in Picture mode, use C-w, C-c C-d (which is defined as delete-char, as C-d is in other modes), or one of the picture rectangle commands (see section Picture Mode Rectangle Commands).

1.2 Controlling Motion after Insert

Since “self-inserting” characters in Picture mode just overwrite and move point, there is no essential restriction on how point should be moved. Normally point moves right, but you can specify any of the eight orthogonal or diagonal directions for motion after a “self-inserting” character. This is useful for drawing lines in the buffer.

C-c <

Move left after insertion (picture-movement-left).

C-c >

Move right after insertion (picture-movement-right).

C-c ^

Move up after insertion (picture-movement-up).

C-c .

Move down after insertion (picture-movement-down).

C-c `

Move up and left (“northwest”) after insertion
(picture-movement-nw).

C-c '

Move up and right (“northeast”) after insertion
(picture-movement-ne).

C-c /

Move down and left (“southwest”) after insertion
(picture-movement-sw).

C-c \

Move down and right (“southeast”) after insertion
(picture-movement-se).

Two motion commands move based on the current Picture insertion direction. The command C-c C-f (picture-motion) moves in the same direction as motion after “insertion” currently does, while C-c C-b (picture-motion-reverse) moves in the opposite direction.

1.3 Picture Mode Tabs

Two kinds of tab-like action are provided in Picture mode. Use M-<TAB> (picture-tab-search) for context-based tabbing. With no argument, it moves to a point underneath the next “interesting” character that follows whitespace in the previous nonblank line. “Next” here means “appearing at a horizontal position greater than the one point starts out at”. With an argument, as in C-u M-<TAB>, this command moves to the next such interesting character in the current line. M-<TAB> does not change the text; it only moves point. “Interesting” characters are defined by the variable picture-tab-chars, which contains a string whose characters are all considered interesting. Its default value is "!-~".

<TAB> itself runs picture-tab, which operates based on the current tab stop settings; it is the Picture mode equivalent of tab-to-tab-stop. Normally it just moves point, but with a numeric argument it clears the text that it moves over.

The context-based and tab-stop-based forms of tabbing are brought together by the command C-c <TAB>, picture-set-tab-stops. This command sets the tab stops to the positions which M-<TAB> would consider significant in the current line. The use of this command, together with <TAB>, can get the effect of context-based tabbing. But M-<TAB> is more convenient in the cases where it is sufficient.

1.4 Picture Mode Rectangle Commands

Picture mode defines commands for working on rectangular pieces of the text in ways that fit with the quarter-plane model. The standard rectangle commands may also be useful (@pxref{Rectangles}).

C-c C-k

Clear out the region-rectangle (picture-clear-rectangle). With argument, kill it.

C-c C-w r

Similar but save rectangle contents in register r first (picture-clear-rectangle-to-register).

C-c C-y

Copy last killed rectangle into the buffer by overwriting, with upper left corner at point (picture-yank-rectangle). With argument, insert instead.

C-c C-x r

Similar, but use the rectangle in register r
(picture-yank-rectangle-from-register).

The picture rectangle commands C-c C-k (picture-clear-rectangle) and C-c C-w (picture-clear-rectangle-to-register) differ from the standard rectangle commands in that they normally clear the rectangle instead of deleting it; this is analogous with the way C-d is changed in Picture mode.

However, deletion of rectangles can be useful in Picture mode, so these commands delete the rectangle if given a numeric argument.

The Picture mode commands for yanking rectangles differ from the standard ones in overwriting instead of inserting. This is the same way that Picture mode insertion of other text differs from other modes. C-c C-y (picture-yank-rectangle) inserts (by overwriting) the rectangle that was most recently killed, while C-c C-x (picture-yank-rectangle-from-register) does likewise for the rectangle found in a specified register.

About This Document

This document was generated on March 29, 2022 using texi2html 5.0.

The buttons in the navigation panels have the following meaning:

where the Example assumes that the current position is at Subsubsection One-Two-Three of a document of the following structure:

• 1. Section One
  • 1.1 Subsection One-One
    • ...
  • 1.2 Subsection One-Two
    • 1.2.1 Subsubsection One-Two-One
    • 1.2.2 Subsubsection One-Two-Two
    • 1.2.3 Subsubsection One-Two-Three     <== Current Position
    • 1.2.4 Subsubsection One-Two-Four
  • 1.3 Subsection One-Three
    • ...
  • 1.4 Subsection One-Four

This document was generated on March 29, 2022 using texi2html 5.0.